Alternatives

Cherry Blossom vs EasyEDA: the best EasyEDA alternative

EasyEDA and Cherry Blossom both run in a browser tab and both end with a board you can order. EasyEDA is a free manual editor connected to LCSC's parts and JLCPCB's factory, where you draw every wire yourself. Cherry Blossom is an editor with an AI agent, Sakura, that designs the board from what you tell it and checks it before you order.

By the Cherry Blossom teamUpdated November 3, 2026

The short answer

The best EasyEDA alternative for makers and engineers who want a working board without drawing it is Cherry Blossom: you describe the board in plain English and get a checked schematic, PCB layout and fab files in the same browser tab, with an editable KiCad project if you want to finish by hand.

If you want another free manual editor, KiCad is the usual second choice and it imports EasyEDA Std and Pro projects. DipTrace suits people who want a desktop licence they buy once.

The problem

Why do people look for an EasyEDA alternative?

  • Drawing by hand. EasyEDA is free, but you still pick every part, draw every wire and route every trace yourself.

  • The supply chain. EasyEDA is built around LCSC parts and JLCPCB ordering, which is ideal if that is your fab and less useful if it is not.

  • Size limits. The Std edition tops out at 300 devices or 1,000 pads, so bigger boards push you to Pro or to another tool.

  • The free plan's edges. Free accounts get 0.5GB of cloud storage and ads, which the paid Premium plan removes.

The difference

How is Cherry Blossom different from EasyEDA?

EasyEDA comes in two editions, both free. Std is the quick-start one, for designs up to 300 devices or 1,000 pads, with simple circuit simulation, aimed at students, teachers and makers. Pro is the one EasyEDA recommends, with a newer interface and room for much larger designs. Both run in the browser or as desktop clients, with offline modes that keep projects on your own disk. EasyEDA connects to LCSC for components and JLCPCB for boards, and one-click ordering matches the manufacturing files automatically.

Cherry Blossom can skip the drawing. You describe the board and the agent, Sakura, finds real parts, draws the schematic and then places and routes the PCB, and you get a 3D view and BOM. Footprints come from real part data, a Checks panel lists errors and warnings, and a DRC check runs before you export. Its editor is free to use by hand, like EasyEDA's, and the AI agent starts at Pro.

Side by side

How do EasyEDA and Cherry Blossom compare?

  • How you design

    Cherry Blossom

    Describe it, or draw by hand; Sakura builds the board

    EasyEDA

    Draw and route it yourself

  • Where it runs

    Cherry Blossom

    Browser

    EasyEDA

    Browser or desktop client

  • Checks

    Cherry Blossom

    Checks panel with DRC before you export

    EasyEDA

    Rules checks you run yourself

  • Simulation

    Cherry Blossom

    None

    EasyEDA

    Simple simulation in the Std edition

  • Ordering

    Cherry Blossom

    None built in; export Gerbers for any board house

    EasyEDA

    One-click JLCPCB ordering, LCSC parts

  • Exports

    Cherry Blossom

    Gerbers, KiCad project, BOM, pick-and-place, STEP, Circuit JSON

    EasyEDA

    Manufacturing files; see EasyEDA's docs

  • Pricing

    Cherry Blossom

    Free editor; AI from $20/mo Pro, $140/mo Ultra

    EasyEDA

    Free, including commercial use; optional Premium

EasyEDA details from easyeda.com and its pricing page, September 2026.

Cost

What does each one cost?

EasyEDA's editors are free for everyone, including commercial use. Its optional Individuals Premium plan is $19.9 a month, billed annually, as listed on EasyEDA's pricing page, September 2026. Premium raises cloud storage from 0.5GB to 10GB and adds longer operation logs, more component drawing requests a month, priority support and an ad-free editor. A per-member Enterprise plan is listed as coming soon.

The Free plan is the full editor, by hand, with no AI. Pro adds the AI for $20 a month, with 4M AI credits a month. Ultra is $140 a month with 32M credits and the frontier models. More credits past the allowance are $5 per 1M credits, bought up front only if you want them. There is no API key to connect and no per-seat licence. What you pay for is the AI doing the design work. See the pricing page for the full breakdown.

Switching

What happens to your EasyEDA projects?

Cherry Blossom does not import EasyEDA projects yet; EasyEDA import is coming. It imports KiCad projects, so your existing designs either stay in EasyEDA or move to KiCad, whose importers read EasyEDA Std backups and Pro projects, and from there into Cherry Blossom.

Ordering changes too. Cherry Blossom has no built-in ordering, so there is no one-click JLCPCB route. If you want to keep ordering from JLCPCB, download the Gerbers, drill files, BOM and pick-and-place files and upload them there yourself.

Choosing

When is Cherry Blossom the better choice?

  • You know what the board should do but do not want to lay it out yourself.

  • You want parts chosen and footprints matched from real part data, rather than searching a library.

  • You want every change checked against manufacturing rules before you can order.

  • You want the design in open formats: an editable KiCad project and Circuit JSON.

That covers most makers and students who picked EasyEDA because it was free and in the browser.

When is EasyEDA the better choice?

  • You want a free tool and you enjoy drawing and routing the board yourself.

  • You order from JLCPCB and source from LCSC, and want that path to be one click.

  • You want quick circuit simulation of a simple design (EasyEDA Std).

The honest limits. Cherry Blossom is an early beta. Circuit simulation is coming but not here yet, and it imports KiCad projects today, with import from Altium, EAGLE, Cadence Allegro, PADS and EasyEDA coming. It has no comments or team management, and it is not built for high-speed or RF sign-off.

Everything else

What are the best EasyEDA alternatives?

1Cherry BlossomOur product

Best for: Going from a plain-English description to a fab-ready board, in the browser

A full schematic and PCB editor in the browser with an AI agent, Sakura, built in. Describe the board in plain English and Sakura finds real parts, draws and tidies the schematic, then asks before it places and routes the PCB. Edit anything by hand, then export Gerbers, an editable KiCad project, a BOM, pick-and-place, STEP or open Circuit JSON. More than 100 people at companies in over 20 countries use it.

Platform
Browser, nothing to install
Pricing
The Free plan is the full editor, by hand, with no AI. Pro adds the AI for $20 a month, with 4M AI credits a month. Ultra is $140 a month with 32M credits and the frontier models. More credits past the allowance are $5 per 1M credits, bought up front only if you want them. There is no API key to connect and no per-seat licence.
2EasyEDA

Best for: Free design tied to LCSC parts and JLCPCB ordering

Std and Pro editors, both free, in the browser or as desktop clients, with real-time 3D and one-click ordering from JLCPCB.

Platform
Browser and desktop client
Pricing
Free; optional Premium plan
3KiCad

Best for: A free, open-source desktop editor

Schematic capture with SPICE simulation, PCB layout with an interactive router, and a 3D viewer. Imports EasyEDA Std backups and Pro projects.

Platform
Windows, macOS, Linux
Pricing
Free
4DipTrace

Best for: A pay-once desktop editor

Schematic, layout with push and shove routing and a shape-based autorouter, a component editor and a 3D preview.

Platform
Windows, macOS
Pricing
300-pin freeware; paid perpetual editions

Deciding between the two free editors? Read KiCad vs EasyEDA. Curious about AI inside EasyEDA itself? See our EasyEDA AI copilot guide.

See it on your own board

The quickest way to judge any of this is to describe a board and read what comes back: the schematic, the layout, and what the Checks panel says about it. It runs in the browser, with the AI included from the Pro plan up.

Questions

The best EasyEDA alternative for people who want a working board without drawing it is Cherry Blossom. Like EasyEDA it runs in the browser, but instead of placing parts and routing traces yourself, you describe the board in plain English. The AI agent, Sakura, picks parts, builds the schematic and PCB layout, matches footprints from real part data, and lists errors and warnings in a Checks panel. You export Gerbers, a BOM, pick-and-place files or an editable KiCad project, and upload the fabrication files to a board house to order. Plans start free, with the AI from $20 a month. If you want another free manual editor instead, KiCad is the usual pick: it is open source, runs on Windows, macOS and Linux, and imports EasyEDA Std backups and Pro projects. DipTrace suits people who want a desktop licence they buy once. If your whole workflow is JLCPCB and LCSC and you enjoy drawing, staying on EasyEDA is reasonable.

Yes. EasyEDA's Std and Pro editors are free, including for commercial use. An optional Individuals Premium plan, listed at $19.9 a month billed annually in September 2026, adds storage, priority support and an ad-free editor.

Yes. KiCad's documentation lists EasyEDA Std backups and EasyEDA Pro projects among its import formats. Run KiCad's rules checks on the imported design before ordering.

Not directly. Cherry Blossom has no built-in ordering. You download the Gerbers, drill files, BOM and pick-and-place files and upload them to JLCPCB, PCBWay or any fab house you like.

Describe a board. See what comes back.

Schematic, layout and a Checks panel, in the browser. Exports to Gerbers and KiCad.

By signing up, you agree to our Terms of Service and Privacy Policy.